- Pipe
- Buttweld Fitting
- Forged Fitting
- Branch Connection
- Flanges
- Pipe Spacer

Pipe
We Manufacture and Stock Pipe to be used in Refineries.
Seamless Pipe – ½” NB - 16” NB(21.3mm – 406.4mm)
Wall Thickness - SCH STD, SCH 40, SCH XS, SCH 80, SCH 160, SCH XXS
Length: Random 05-07 Meters or Cut Length as per Client Requuirment
Supplementary Requirement, SHELL MESC SPE 74/004

BUTTWELD FITTING
We Manufacture and Stock Buttweld Fitting to be used in Refineries.
Seamless – ½” NB - 16” NB(21.3mm – 406.4mm)
Wall Thickness - SCH STD, SCH 40, SCH XS, SCH 80, SCH 160, SCH XXS
ASME B16.9, Supplementary Requirement, SHELL MESC SPE 74/004
Specification and Grades: ASTM A234 WPB / ASME SA234 WPB / ASTM A420 WPL6 / ASME SA420 WPL6 / ASTM A960 / ASME SA960.
Shapes / Forms - 90° Degree Elbow, 45° Degree Elbow, 180° Degree Elbow, Concentric Reducer, Eccentric Reducer, End Caps, Equal Tee, Reducing Tee, Nipple, Swage Nipple, Stub End, Bends, Long Radius, Short Radius, 1.5D, 3D Etc.

FORGED FITTING
We Manufacture and Stock Forged Fitting to be used in Refineries.
Size – 3/8” NB - 4” NB
Wall Thickness Class - 3000# LBS, 6000# LBS, 9000# LBS
ASME B16.9, Supplementary Requirement, SHELL MESC SPE 74/004
Specification and Grades: ASTM A105N / ASME SA105N / ASTM A350 LF2 / ASME SA350 LF2 / ASTM A961 / ASME SA961.
Shapes / Forms - Socketweld / Threaded: 90° Degree Elbow, 45° Degree Elbow, Cross, Full Coupling, Half Coupling, End Caps, Insert, Nipple, Hex Nipple, Boss, Union, Socket, Head Plug, Bushing, Male - Female Etc.

BRANCH CONNECTION
We Manufacture and Stock Branch Connection to be used in Refineries.
Size – 1/2" NB - 48" NB - Buttweld
3/8” NB - 02” NB - Forged
Wall Thickness Class - 3000# LBS, 6000# LBS
ASME B16.9, Supplementary Requirement, SHELL MESC SPE 74/004
Specification and Grades: ASTM A105N / ASME SA105N / ASTM A350 LF2 / ASME SA350 LF2 / ASTM A961 / ASME SA961.
Shapes / Forms - Socketweld / Threaded: Weldolet®, Sockolet®, Sweepolet®, Laterolet®, Threadolet®, Weldoflange, Latroflange, Nipoflange, Socketweld Elbolet® Etc.

FLANGES
We Manufacture and Stock Flanges to be used in Refineries.
Size – 1/2" NB - 60" NB
Wall Thickness Class - 150# LBSs, 400# LBS, 600# LBS, 900# LBS, 1500# LBS, 2500# LBS
ASME B16.9, Supplementary Requirement, SHELL MESC SPE 74/004
Specification and Grades: ASTM A105N / ASME SA105N / ASTM A350 LF2 / ASME SA350 LF2 / ASTM A961 / ASME SA961.
Shapes / Forms - Weldneck, Socketweld, Blind, Slip-on, Lap Joint, Threaded etc.

PIPE SPACER
Our range of pipe casing spacers / insulators centre water and sewer pipes in casings. They are used to support and electrically insulate a pipeline from a casing pipe through which it must pass. The spacers are easy to install, are virtually corrosion proof, and provide insulating protection from a possible electrical shorting between the carrier pipe and casing. No special tools are required and they are easily applied by a single worker. The casing spacers eliminate the need to fill the casing annulus with sand and as they are so easy to remove, it allows damaged pipes to be repaired or replaced quickly. Let us know what your required runner height is (annular clearance between the inner pipe and the outer casing) and we will offer you a suitable solution for your pipeline.
Casing Pipe Spacers | DWC Pipe Spacers
Conduit Spacers | Casing Insulators Spacers
Plate Type Spacers | Bell Mouth Coupler
Base and Intermediate spacer | Casing Pipe End Seal